Welding Positioner with 2" Center Hole with Chuck and Speed Wheel

Description

This table top welding positioner has been manufactured by AC Precision out of Hartford, WI.
Standard lead time is 2-3 weeks based upon supply.
This table top welding positioner has a pivot design with screw tilt control, and a 10 inch steel table. This allows heavier loads of approximately 175 pounds, centered in the vertical. This unit has a 2 inch center hole, foot pedal, double sealed twin ball bearings, enclosed gearing, and our unique Dual Constant Current Contact, that is spring loaded for long life, rated at 300 amps @ 75% Duty Cycle. Motor is a 0-10 RPM 90V DC Leeson Electric USA, PM gearmotor and control uses 115V AC power, insulated and isolated for H.F. TIG welding. This unit comes with an 8 inch 3-jaw universal Speed Wheel chuck, and one set of reversible jaws.
This welding positioner is different in many good ways, but here are six
HUGE
differences.
CNC machined 1/4″ steel plate welded construction – aligns the precision secondary gearing for long service.
Total 360 degree enclosure of the precision secondary gearing – keeps grinding dust, weld spatter and fingers out of the pinch points.
Twin – not one but TWO – precision SEALED ball bearings that distribute the load and still deliver smooth rotation.
Our own Dual 300 AMP, “Constant Current Contact” for the ground connection. This spring loaded brass ground follows the back side of the table keeping the welding current out of the precision bearings – 300 AMP at 75% duty cycle.
Precision machined steel secondary gearing – no exposed belts or chains.
Powder coated for increased corrosion resistance.se Order Form
List Price
,750.00
Required Power
115 Volt AC Power
Weight Capacity
175# balanced/centered vertical
75# balanced at 45 degrees
50# balanced at 90 degrees, 2″ from face plate
Table
10″ diameter with 3/8″ slots, 5/16″ thick, steel
Table Tilt
0-90 degree pivot design w/screw adjustment
Motor
90 volt PM DC motor 1/8 HP Leeson Electric, USA
Control
SCR High Frequency tolerant control
Power on light, fused
Forward, Reverse toggle on Control
Speed Range
Model #WP-12, 0-10 RPM 80 lbs. inch torque
Ground Current
300 Amps DC table contact @ 75% Duty Cycle
Shipping Weight
Approximately 150 lbs. Ships LTL truck
Standard Items Included in Purchase Price:
Double Sealed Main Ball Bearings
Motor Forward/Reverse Switch
Standard 10″ Slotted Steel Mounting Plate
Includes On/Off Foot Pedal