-40%
GE Pneumatic Lab Overhead Stirrer - Lab Mixer - small Air powered variable motor
$ 23.76
- Description
- Size Guide
Description
Offered is a new old stock GE Pneumatic / Air powered motor mixerseveral years ago my father purchased contents from a GE lab that was closed down
I think they developed lighting and high power bulbs at this lab
This motor was in a stock room and I think it was a spare part, I do not think it was ever used
It has a very high quality look and feel, the motor end is approx. 2" in diameter by 1 1/2" tall
The shaft is approx. 3 1/2" long from the underside of the motor to the end of the propeller mixer
The propeller can easily be unscrewed from the shaft, the bottom of the shaft is threaded
I tested the motor with my compressor and a Thumb Lever Air Gun that you typically clean parts with
the motor runs Very smoothly and it is very high speed, the motor speed can be adjusted with the air pressure
The propellers are approx. 1/2" in diameter so I think they would even fit into a test tube
but you would reduce pressure to reduce the speed in a small vessel
I suspect these Air motors were used around explosive chemicals
as there would be no sparks made like there would be with an electric mixer
One of the 2 brass pieces on the sides is the air inlet, it has an approx. 1/8" opening
The second brass piece is the air outlet, it is slotted to reduce noise as these run with a low noise output
The mixer has 2 hex head mounting bolts on the bottom so it would be easy to mount it to a stand
hopefully someone can put it to good use!..................................... Thanks for looking! ....
(note; we will gladly combine multiple items for shipping to save on shipping costs,
The shipping price quoted is to the the lower 48 states,
Alaska and Hawaii may cost a bit more so please ask for the actual amount.
if you purchase more than one item please wait for an up-dated invoice before paying)..
. If you would like another shipping method like priority mail we will give you the cost after the auction has ended.,
please ask for a calculation of the cost.
....... ........ please Email me with any questions. I'll be glad to answer them!
If you don't intend to complete the transaction, please don't bid.
All Sales are Final: I try to give a full description, and show plenty of good pictures so that you know what you're bidding on.
If there's something you feel is missing from the description, Email me before you bid please......Buyer pays S&I.... N.Y. state
residents please add 8.5 % tax.. Sorry, no local pickup....... sorry, NO Overseas shipping!