Flight Mode Switcher 6 Modes Small/Lightweight Switcher APM PX4 Pix Autopilot

Description

One (1)
New
Hobbyking
Flight Mode Switcher
3V 5V  6 Modes
Small/Lightweight
for
APM, PX4, Pix Autopilot
In Stock, US Seller, Fast Shipment
The flight mode switcher has been designed for open source autopilots such as APM, PX4 and Pix etc. It can switch the flight mode accurately and quickly and replaces the troublesome 2 stage and 3 stage switchers.
Users can set the parameters for the flight mode switcher on the unit and choose the most suitable modes for their requirements. The flight mode switcher features a stable performance, is easy to set up and is small and lightweight.
Typical flight modes are as follows:
• STA (Stabilized) Model will automatically level itself
• SIM (Simple) Allows you to control the movement of the model from the pilots point of view regardless of which way the model is facing
• ALT (Altitude Hold) When this mode is selected it will hold this altitude
• LOI (Loiter) Allows model to hover in the same spot on its own without any input from the pilot
• AUT (Auto) The model will follow a pre-programmed course stored in the autopilot
• RTL (Return to land) Once selected the model will return and land at the point of take-off
The flight mode switcher is simple to install on your transmitter but it is not "plug & play", there is a small amount of soldering involved inside the Tx. See under the
"Files"
tab for installation instructions.
Once installed on your transmitter and set up in "Mission Planner" it is very simple to use, just press the relevant mode button on the switcher and the model will go into that mode. There is an indicator light to show which mode has been selected and is in use.
Features:
• Allows the user to easily set 6 flight modes
• Simple and straightforward to install
• Compact and lightweight
• Status indicator lights
Specs:
Type:
Flight Mode Switcher
Working Voltage:
3~5V
Modes:
6 selectable
Operating Temperature:
-10°C~+60°C
Dimensions:
59 x 29 x 9.3mm
Weight:
13g