Digital With Magnetic High Precision CNC IP65 0.0001MM Z Axis Zero Pre-setter

Description

IP65 0.0001MM Digital With Magnetic High Precision CNC Z Axis Zero Pre-setter
New
Features:
1. Large screen LCD display, clear and easy to read
2.Mm/in button; in the power-on state, tap this button to convert the metric inch unit
3.ON/OFF/ZERO: Short press this button to start and zero setting; long press for 3 seconds to shut down.
4. Powered by a CR2032 3V button battery
5. Body height 50mm
6. Range 0-2.5mm
7. Reading resolution: 0.001mm
8. Accuracy error ：0.005mm
Instructions:
1. Before using, press the cutter shaft a few times to check whether the slide is smooth.
2. Wipe the bottom of the tool setting tool with the clean and soft cotton cloth and the zero base surface.
3. Wipe the workbench or workpiece that needs to be determined to the distance of the tool tip.
4. Place the tool setting tool upside down on the workbench or flat surface, and press down gently to ensure that the zero setting base surface and the work table or plane are completely fitted. Press the ON/OFF/ZERO key to set the zero position. .
5. After the zero position is set, set the tool setting tool on the table or workpiece plane directly below the machine tool tip, move the tool tip slowly down, touch the surface of the tool axis, and continue to slowly adjust downward until the LCD The degree on the display is 0.00mm. At this time, the distance from the tip to the table or the plane of the workpiece is 50 mm + / 0.001 mm. Zero the Z axis on the device at this time, then move the Z axis of the device to a safe distance, take the tool to the tool, and then move the Z axis down to the previously set zero position. At this time, the tool tip reaches the workbench. Or the distance of the workpiece plane is 50 +/- 0.001 mm. According to the actual needs, adjust the distance from the tool tip to the work surface or the workpiece plane to complete the tool setting.
1.Your valid phone number is very necessary for the shipping, otherwise we can't guarantee that the package would safely arrives.
2. Any Customs tax applied to this package should be covered by buyers.
3.As has been stated on the eBay item description, Import duties, taxes and charges are not included in the item price and shipping charges. These charges be at the buyer responsibility. meanwhile the customs tax depend on the buyer local customs office.
What in Package:
1 x Z Axis Tool Dial Zero Pre-Setter
Contact Us:
1. We have always been trying to provide the best service and reliable products for every customer, however, accident may happen sometimes, please contact us to resolve any issue before leaving a negative feedback.
2. Please contact us by "Ask a question".
Payment
1. Payment methods accepted : Paypal only.
2. Payment must be received within 7 business days of auction closing.
Shipping
1. We ship your orders within 1-3 business days after the payment received.
2. If you do not receive your item(s) by 30 business days,Please feel free to contact us via ebay mail system , we will try our very best to resolve any problems with you
Return Policy
1. Return is accepted within 30 days after the buyer's receiving the item.
2. If this item is defective upon receipt, customer has up to 14 days from date of receipt for exchange of a new one.
3. Unused/unopened merchandise will be fully credited.
Other Policies
We are not responsible for any custom duty or import tax.
All emails will be answered within 24 hours. If you do not receive our reply, please kindly re-sent your email and we will reply to you as soon as possible, Suggest send eBay message to us, That is easy to find .