BuildPro™ 4' (1.2m) x 4' Welding Table: 36" of Height - Nitride Finish

Description

Store
Policies
Arc-Zone
BuildPro™ 4' (1.2m) x 4' Welding Table: 36" of Height with Nitride Finish
The very practical, modular design of the BuildPro™ Table makes it easy to set-up and tear down for job at hand, big or small.
Save time and money by holding, positioning and locating quickly and easily with a wide variety of BuildPro™ clamps and accessories.
All BuildPro™ Tabletops below have 5/8 thick steel plate, with 5/8 thick holes in a 2" (50.8mm) grid pattern and 1.7" (43.2mm) slots between plates.
The nitriding (heat-treating) process is a mechanical polish and post salt bath oxidative treatment. The benefits of this process include weld spatter resistance and corrosion and wear resistance.
Specifications:
Surface hardness: HRC 58
Coefficient of friction: 0.37
Nitriding case depth: 0.0004" - 0.0008"
Available Models:
Part#
SHT-TMA54746
Dimensions:
47" (1,193mm) x 46" (1,168mm) x 36" (914mm)
Weight:
471 lbs (214kg)
Capacity:
5,000 lbs (2,268kg)
Part#
SHT-TMB54746
Dimensions:
47" (1,193mm) x 46" (1,168mm) x 30" (762mm)
Weight:
466 lbs (211kg)
Capacity:
5,000 lbs (2,268kg)
Part#
SHT-TMQA54746
Dimensions:
47" (1,193mm) x 46" (1,168mm) x 36" (914mm)
Weight:
471 lbs (214kg)
Capacity:
5,000 lbs (2,268kg)
Part#
SHT-TMQB54746
Dimensions:
47" (1,193mm) x 46" (1,168mm) x 30" (762mm)
Weight:
466 lbs (211kg)
Capacity:
5,000 lbs (2,268kg)
ARC-ZONE
®
2091 Las Palmas Drive, Ste. F, Carlsbad, CA 92011-1551
Copyright
©
1997-2017, Arc-Zone
®
, Inc. All Rights Reserved.