BuildPro™ 2' (0.56m) x 3' Welding Table: 36" of Height with Nitride Finish

Description

Store
Policies
Arc-Zone
BuildPro™ 2' (0.56m) x 3' Welding Table: 36" of Height with Nitride Finish
The very practical, modular design of the BuildPro™ Table makes it easy to set-up and tear down for job at hand, big or small.
Save time and money by holding, positioning and locating quickly and easily with a wide variety of BuildPro™ clamps and accessories.
All BuildPro™ Tabletops below have 5/8 thick steel plate, with 5/8Ø holes in a 2" (50.8mm) grid pattern and 1.7" (43.2mm) slots between plates.
The nitriding (heat-treating) process is a mechanical polish and post salt bath oxidative treatment.
The benefits of this process include weld spatter resistance and corrosion and wear resistance.
Surface hardness: HRC 58
Coefficient of friction: 0.37
Nitriding case depth: 0.0004" - 0.0008"
Available Models:
Part#
SHT-TMA52238
Dimension:
22" (558mm) x 38" (965mm) x 36" (914mm)
Weight:
253 lbs (115kg)
Capacity:
2,000 lbs (907kg)
Part#
SHT-TMB52238
Dimension:
22" (558mm) x 38" (965mm) x 30" (762mm)
Weight:
248 lbs (112kg)
Capacity:
2,000 lbs (907kg)
Part#
SHT-TMQA52238
Dimension:
22" (558mm) x 38" (965mm) x 36" (914mm)
Weight:
420 lbs (190kg)
Capacity:
2,000 lbs (907kg)
Part#
SHT-TMQB52238
Dimension:
22" (558mm) x 38" (965mm) x 30" (762mm)
Weight:
415 lbs (188kg)
Capacity:
2,000 lbs (907kg)
ARC-ZONE
®
2091 Las Palmas Drive, Ste. F, Carlsbad, CA 92011-1551
Copyright
©
1997-2017, Arc-Zone
®
, Inc. All Rights Reserved.