Aronson 37,000 LB HEADSTOCK TAILSTOCK WELDING Positioner Steady Hollow Spindle

Description

Aronson model HS30 Headstock/Tailstock setup for Welding Positioning (Three Major Pieces)
1. Headstock description:
Headstock end with
12" spindle hole
has face plate with 1 1/4" T-slots and is 54" square.
Headstock has a plate welded to its face from last job it was set up to work.  Underneath it is a regular welding positioner face plate.  Plate is removable.
Identification plate reads as:
12 inch hollow spindle in main driven headstock
Max rotatable torque, 40,000 lb in
Rated 37,000 lbs at 6 inches to 11,000 lbs at 60 inches
Face is 54" square with 1 1/4" T-slots
Serial number 7465
2.  Tailstock Description:
This powered end that was doing tailstock work is 59" square with 1" T-slots
NOTE:  Setup was using an actual powered device for the tailstock, not free-wheeling, like what is usually used.  Remove gear, and it is free-wheeling.  It is nice, but no data plate.  These could be run separately, as powered units, but we are not giving any rating on the tailstock piece for this use.
3.  Steady Rest Description
:
Steady rest is capable of supporting a shaft or pipe protruding  from end of workpiece, but no rating tag has been found.  Appears to handle about a 5 to 6 inch piece on its rollers, and has thrust bearings to bear the thrust of a flange or other flat surface that can bear against its face.
pinpointmachine.com to speak to us more about this setup.
Ask for Bill or Richard
Note:  All pieces are set up on riser skids, with forklift pockets so they can be handled easily from the sides
General information:
Shipping weight of three pieces are estimated, and shipping sizes are:
Headstock barely handles with a 6,000 lb forklift.  Shipping size is 92" high, 90" wide, and 84" long
Tailstock handles well with a 6,000 lb forklift.  Shipping size is 93" high, 59" wide, and 102" long
Steady Rest handles easily with 6,000 lb forklift.  Shipping size is 73" high, 83" wide, and 94" long
Selling used, as-is, and can be seen at our warehouse
Loading onto flatbed truck is no charge
48 hrs notice needed to have items out for loading.  FOB Bentley, LA, venue for all matters in sale
Will consider swaps and trades of valuable running machinery