20L Lab Electric Overhead Stirrer Mixer Agitator Homogenizer LCD Digital Display

Description

parameter: Large mixing amount (H, O): 20L Motor input power: 72W Motor output power: 60W Mixer power: 80W Voltage: 100-240V Speed: 200-3000rpm Speed display: LCD Variable speed: 20rpm Torque: 40 (N/CM) Overload protection: automatic shutdown Maximum viscosity [MPAS]: 10000 Drilling chuck clamping diameter range [VAC]: 0.5-10 DIN EN60589 protection method: IP42 Allowable ambient temperature [°C]: 5-40 Allowable ambient humidity [%]: 80
Store category
Sign Up Now !
You may also like
20L Lab Electric Overhead Stirrer Mixer Agitator Homogenizer LCD Digital Display
Product Description
Overhead electric agitator, DC permanent magnet motor, low noise, maintenance-free. Stable start, overload protection, loop protection, adjustable speed, precise and controllable.
feature:
1. Competent for high load
Can work continuously for a long time and perform well.
2. Condensation tongs are wrapped in rubber
The condensation tongs are wrapped in rubber, which increases friction and effectively clamps the container. The torque can be adjusted automatically according to the change of sample viscosity.
3. High and low speed, accurate and controllable
CD shows the set value and actual value of speed, and can monitor the speed and time in real time. The speed range is wide 200-3000rpm, constant speed, high and low speed can be accurately controlled.
Range of use:
It is a good tool for petroleum, chemical, metallurgy, textile, food, medicine and sanitation, environmental protection, biochemical laboratory, analysis room, education and research.
parameter:
Large mixing amount (H, O): 20L
Motor input power: 72W
Motor output power: 60W
Mixer power: 80W
Voltage: 100-240V
Speed: 200-3000rpm
Speed display: LCD
Variable speed: 20rpm
Torque: 40 (N/CM)
Overload protection: automatic shutdown
Maximum viscosity [MPAS]: 10000
Drilling chuck clamping diameter range [VAC]: 0.5-10
DIN EN60589 protection method: IP42
Allowable ambient temperature [°C]: 5-40
Allowable ambient humidity [%]: 80
Steps:
Press and hold the right button to start, press the setting button to select the setting
① Press the setting button once, the mode flashes, press the upper and lower two buttons in the middle to select the mode, there are three modes corresponding to different speed and time respectively.
② Select the mode, press the setting button again, the RPM flashes, and use the up and down keys to set the desired speed per minute.
③ After setting the speed, press the setting key, Min flashes, use the up and down keys to set the required timing time, the speed reaches the set speed after starting, and the timing starts.
④ Set the above parameters in a specific mode, long press the set button, the screen flashes, indicating that the parameter has been saved in this mode, next time only need to select the mode corresponding to the set speed and time, press the right button to start and pause, long The key is turned off.
The package includes:
1 *Host
1 *Stirring rod
1 * Pillar
1 * thick bottom
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept ebay payment 。
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Delivery details
Shipping:
The item will be shipped from our US warehouse to United States, which is more faster than from aboard.
2-9 working days to: USA
Terms of sales
We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
About us
Your satis
faction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Contact us
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Feedback
On Jul-11-21 at 20:18:15 PDT, seller added the following information: